Address: JACK INTERNATIONAL TRADE CENTER, 518 JIASHAN ROAD, JIASHAN,ZHEJIANG,P.R.CHINA.
E-mail: [email protected]
First, Monthly Maintenance of Hydraulic Platform Vehicl […]
First, Monthly Maintenance of Hydraulic Platform Vehicle
During the monthly maintenance of the lifting platform, it is necessary to carefully check the wear and tear of the rollers, intermediate shafts and bearings, cylinder pins and bearings, boom hinges and bearings of the hydraulic lift.
1. Check the oil quality and oil level of hydraulic oil. When the platform is lifted all the way, if foreign bodies such as darkening, sticking or gravel are found, it should be replaced in time (32 # hydraulic oil).
2. Adding some lubricating oil to all bearing parts of the machine to prolong the service life of the elevator bearing.
Second, Year-end Maintenance of Hydraulic Platform Vehicles
1. Release the hydraulic oil of the elevator, tighten the joint and take out the oil filter, clean it up with compressed air, then put it back into the tank, replace the new oil, and connect the pipeline.
2. Check all hydraulic pipes and joints of lifting platform. Pipeline should not be damaged, joint should not be loosened, all joints must be tightened.
3. Remove and disassemble the descending valve under the high-lift hydraulic platform car. Blow the plunger clean with compressed air, then load it in and reinstall it.